Nội dung text 14 Kitchen machine.pdf
Test Method Conformity Assurance Dammam – Electrical Lab Product Kitchen machine Issue date 01/04/2024 Test method # TMD01014 Revision 01 Reference standered SASO GSO IEC 60335-2-14,SASO GSO 60335-1 Revision date 01/04/2024 Result /النتيجة Name of the test/ االختبار اسم البند رقمClause No. Checking Frequency MOCI_D_267A Checking country of origin MOCI_D_267B Checking for Rated Voltage MOCI_D_267B 7 instructions and Marking الوسم و االرشادات to access against Protectionالحماية من الوصول الى االجزاء المكهربة live parts 8 التيار و القدرةPower input and current 10 and current Leakageتيار التسريب و المتانة الكهربائية electric strength 13 19 operation Abnormal التشغيل غير الطبيعي 20 hazard mechanical and Stabilityاالتزان و االخطار الميكانيكية (2203SASO(4.3 Plugالمقننات القابس : الشكل و المقاسات و
Test Method Conformity Assurance Dammam – Electrical Lab Product Kitchen machine Issue date 01/04/2024 Test method # TMD01014 Revision 01 Reference standered SASO GSO IEC 60335-2-14,SASO GSO 60335-1 Revision date 01/04/2024 7 Marking and instructions 7.1 Appliances shall be marked with the: – rated voltage or rated voltage range in volts – symbol for nature of supply, unless the rated frequency is marked; – rated power input in watts or rated current in amperes; – name, trade mark or identification mark of the manufacturer or responsible vendor – model or type reference symbol 5172 of IEC 60417, for class II appliances only IP number according to degree of protection against ingress of water, other than IPX0 7.2 Stationary appliances for multiple supply shall be marked with the substance of the following: Warning: Before obtaining access to terminals, all supply circuits must be disconnected. This warning shall be placed in the vicinity of the terminal cover. 7.3 Appliances having a range of rated values and which can be operated without adjustment through out the range shall be marked with the lower and upper limits of the range separated by a hyphen. Appliances having different rated values and which have to be adjusted for use at a particular value by the user or installer shall be marked with the different values separated by an oblique stroke. 7.4 If the appliance can be adjusted for different rated voltages, the voltage to which the appliance is adjusted shall be clearly discernible. 7.5 For appliances marked with more than one rated voltage or with one or more rated voltage ranges, the rated power input or rated current for each of these voltages or ranges shall be marked 7.6 Correct use of symbols 7.7 Appliances to be connected to more than two supply conductors and appliances for multiple supply shall have a connection diagram fixed to them, unless the correct mode of connection is obvious.
Test Method Conformity Assurance Dammam – Electrical Lab Product Kitchen machine Issue date 01/04/2024 Test method # TMD01014 Revision 01 Reference standered SASO GSO IEC 60335-2-14,SASO GSO 60335-1 Revision date 01/04/2024 7.8 Terminals used for connection to the supply mains shall be indicated as follows: Terminals intended exclusively for the neutral conductor shall be indicated by letter N Protective earthing terminals shall be indicated by the symbol 5019 of IEC 60417. These indications shall not be placed on screws, removable washers or other parts which can be removed when conductors are being connected. 7.9 Unless it is obviously unnecessary, switches which may give rise to a hazard when operated shall be marked or placed so as to indicate clearly which part of the appliance they control. 7.10 Indication of the different positions of switches on stationary appliances and the different positions of controls on all appliances shall be indicated by figures, letters or other visual means If figures are used for indicating the different positions, the off position shall be indicated by the figure 0 and the position for a higher value, such as output, input, speed or cooling effect, shall be indicated by a higher figure. The figure 0 shall not be used for any other indication unless it is positioned and associated with other numbers so that it does not give rise to confusion with the indication of the off position. 7.11 Controls intended to be adjusted during installation or in normal use shall be provided with an indication for the direction of adjustment 7.12 Instructions for use shall be provided with the appliance so that the appliance can be used safely The instructions shall state the substance of the following: This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
Test Method Conformity Assurance Dammam – Electrical Lab Product Kitchen machine Issue date 01/04/2024 Test method # TMD01014 Revision 01 Reference standered SASO GSO IEC 60335-2-14,SASO GSO 60335-1 Revision date 01/04/2024 The instructions shall include the operating times and speed settings for accessories. The instructions for slicing machines with a base having a plane surface underneath the sliding feed table shall include the substance of the following: This appliance must be used with the sliding feed table and the piece holder in position unless this is not possible due to the size or shape of the food. The instructions for food processors shall warn against misuse. They shall state that care is needed when handling cutting blades, especially when removing the blade from the bowl, emptying the bowl and during cleaning. The instructions for hand-held blenders shall include the substance of the following: - Always disconnect the blender from the supply if it is left unattended and before assembling, disassembling or cleaning; - Do not allow children to use the blender without supervision. Accessories, other than those supplied with the appliance, shall include instructions for their safe use. Accessories, other than those supplied with the appliance, shall include instructions for their safe use. The instructions shall include details on how to clean surfaces in contact with food. The instructions for appliances incorporating a switch necessary for compliance with 22.40 shall include the substance of the following: Switch off the appliance before changing accessories or approaching parts that move in use. The instructions for centrifugal juicers shall include the substance of the following: Do not use the appliance if the rotating sieve is damaged. 7.12.1 If it is necessary to take precautions during installation of the appliance, appropriate details shall be given. 7.12.2 If a stationary appliance is not fitted with a supply cord and a plug, or with other means for disconnection from the supply mains 7.12.3 If the insulation of the fixed wiring supplying an appliance for permanent connection to the supply mains can come into contact with parts having temperature rise exceeding 50 K during the test of clause 11