Tiêu đề 5- NSQF L-5 FITTER - 1st YEAR- WEEK WISE SPLITUP SYLLABUS AUG. 19 to JULY. 20.pdf ✅

TRADE : FITTER 1st Year Annual Pattern NEW SYLLABUS REVISED IN 2017 NSQF LEVEL-5, Week Wise Split Up Syllabus SECTOR : CAPITAL GOODS AND MANUFACTURING FITTER SECTOR : CAPITAL GOODS AND MANUFACTURING Visit to........ on Youtube Fitter-e-Class Room TRADE THEORY PRACTICAL AND DEMO WEEK WISE SPLIT UP SYLLABUS 1st Year NSQF LEVEL - 5 MODULE - 1 - SAFETY .................................................................. - 25 HRS MODULE - 2- BASIC FITTING .................................................... - 275 HRS MODULE - 3- SHEET METAL ...................................................... - 150 HRS MODULE - 4- WELDING ............................................................... - 100 HRS MODULE - 5 - DRILLING ............................................................ - 150 HRS MODULE - 6 - FITTING ASSEMBLY ........................................... - 150 HRS MODULE - 7 - TURNING ............................................................... - 125 HRS MODULE - 8 - BASIC MAINTENANCE ....................................... - 75 HRS MODULE - 9 - IN – PLANT TRAINING / PROJECT WORK ... - 100 HRS Total - 1100 HRS
MODULE -1 - SAFETY Week No. - 01 1. Introduction about fitter Trade 2. Organisation of the Industrial Training Institute 3. Safety Precautions 4. Approach of Soft skills 5. Personal Protective Equipment (P.P.E.) 6. First Aid 7. Shop Floor Maintenance 8. Housekeeping 9. Disposal of waste Material 10. Occupational Safety and Health 11. Safety Sign 12. Response of Emergency 13. Fire Extinguishers 14. Types of Fire Extinguishers 15. Guidelines for safety Health and Environment 16. Basic understanding on hot work confined space work and Material handling equipment 17. Fitting and Handling loads 18. Moving Heavy Equipment's MODULE -1 - SAFETY Week No. - 01 1. Importance of trade training, List of tools & Machinery used in the trade. 1 hr. 2. Safety attitude development of the trainee by educating them to use Personal Protective Equipment (PPE). 5 hrs. 3. First Aid Method and basic training. 2 hrs. 4. Safe disposal of waste materials like cotton waste, metal chips/burrs etc. 2 hrs. 5. Hazard identification and avoidance. 2 hrs. 6. Safety signs for Danger, Warning, caution & personal safety message. 1hr. 7. Preventive measures for electrical accidents & steps to be taken in such accidents. 2 hrs. 8. Use of Fire extinguishers. 7 hrs. 9. Practice and understand precautions to be followed while working in fitting jobs. 2 hrs. 10. Safe use of tools and equipments used in the trade. Vision Prakashan + 91 9867241975 W.NO. NAME OF PRACTICAL TIME NAME OF DEMONSTRATION NAME OF THEORY TOPIC 01 SIGN. OF INSTRUCTOR SIGN. OF GROUP INSTRUCTOR SIGN. OF PRINCIPAL MODULE -1 - SAFETY Week No. - 01 1. How to identify the tools and equipment's used in fitter section. 2. Identify the personal protective equipment (PPE) occupational hazards and the corresponding potential hazards. 3.1 Prepare the victim to receive artificial respiration. 3.2 Resuscitate the victim by Nelson's arm lift back pressure method. 3.3 Resuscitate the victim by Schafer's method. 3.4 Resuscitate the victim by mouth to mouth method. 3.5 Resuscitate the victim by mouth to – Nose method 3.6 Resuscitate a victim who is under cardiac arrest (CPR) cardio pulmonary. 3.7 Treatment for bleeding victim. 4. How to identify and segregate the waste material in workshop. 5. How to identify the occupational hazards and suggest suitable methods to avoidance occupational hazards. 6. Identify the basic categories of safety sign and record the meaning of safety sign. 7. Preventive measures for electrical accidents. 8. How to operate and select the fire extinguisher according to the type of fire. 9. How to record the safety precaution to be followed while working in fitting job. 10. Record the safety points while using the fitter trade tools and equipment's. INSTRUCTOR TRADE : FITTER Mr. YEAR FIRST- 1st INDUSTRIAL TRAINING INSTITUTE WEEK WISE SPLIT UP SYLLABUS ANNUAL PATTERN NSQF Level-5
MODULE -2 - BASIC FITTING Week No. - 02 19. Linear Measurement 20. Scriber 21. Divider 22. Datum 23. Caliper 24. Jenny Caliper 25. Marking Punch 26. Engineering Hammer 27. 'V' Block 28. Marking of and marking Table Week No. - 03 29. Bench Vice 30. Hacksaw Frame and Blade 31. Types of vice 32. Try Square 33. Elements of file 34. Cut file 35. File specification and grade 36. Types of file 37. Needle of file 38. Special file 39. Pinning of file 40. Convexity of file 41. Filing Techniques 42. Measuring of Angle 43. Semi precision Angular Measuring Instruments 44. Combination set 45. Measuring Standard (English and Metric) MODULE -2 - BASIC FITTING Week No. - 02 11. Identification of tools & equipments as per desired specifications for marking & sawing 5 hrs. 12. Selection of material as per application. 1 hr. 13. Visual inspection of raw material for rusting, scaling, corrosion etc. 1 hr. 14. Marking out lines, gripping suitably in vice jaws, hacksawing to given dimensions. 10 hrs. 15. Sawing different types of metals of different sections. 8 hrs. Week No. - 03 16. Filing Channel, Parallel. 5hrs. 17. Filing‐ Flat and square (Rough finish), 10 hrs. 18. Filing practice, surface filing, marking of straight and parallel lines with odd leg calipers and steel rule. 5 hrs. 19. Marking practice with dividers, odd leg calipers and steel rule (circles, ARCs, parallel lines). 5 hrs. Vision Prakashan + 91 9867241975 W.NO. NAME OF PRACTICAL TIME NAME OF DEMONSTRATION NAME OF THEORY TOPIC 02 03 SIGN. OF INSTRUCTOR SIGN. OF GROUP INSTRUCTOR SIGN. OF PRINCIPAL MODULE -2 - BASIC FITTING Week No. - 02 11. How to identification of tools and equipment as per desired specification for marking and sawing tools used in her shop 12. Determine the type of material used for the purpose. 13. How to visual inspection of row material for rusting scaling corrosion. 14.1 How mark out lines using jenny caliper. 14.2 How to measure length of part with a steel rule. 15.1 How to sawing different thickness of metals and different sections. Week No. - 03 16. How to hold the job in Bench vice horizontally for filing. 17. How to check flatness and squareness with straight edge and Try square. 18. How to mark parallel lines using outside caliper. 19.1 Marking angular lines with protractor and scriber. 19.2 How to marking tangent arcs and circles with divider and scriber. INSTRUCTOR TRADE : FITTER Mr. YEAR FIRST- 1st INDUSTRIAL TRAINING INSTITUTE WEEK WISE SPLIT UP SYLLABUS ANNUAL PATTERN NSQF Level-5