Nội dung text 12.MS- EXTERNAL PAINTING 9-12-16.pdf
ASHIANA HOUSING LTD METHOD STATEMENT FOR EXTERNAL PAINTING INTRODUCTION: The purpose of this Method Statement for Painting of Building is to describe in detail the procedure to be adopted. OBJECT: Approved Elevation drawings with color scheme MATERIALS: Paint and Finishing Materials: It should be as per approved color and code number. Putty & Primer: -It should be as per approved make. EQUIPMENT AND TOOLS: Air compressor, Spray Gun, Jhoola/Suspended platform, Fiber Blade, Paint Brush (as per required size), Painting roller, Masking tape, Sand paper, Polythene sheet, old cloth HEALTH AND SAFETY PROVISIONS: a) Inspect to ensure that safety belt, safety goggle and safety mask has been used before start of work to avoid any accident. b) Inspect and ensure that all ropes & hanging platform are safe for work. c) Ensure that one helper should be available at terrace level during painting work to check all the knots of ropes are properly tight. PREPARATORY WORK: a) Prior to any application, the surface must be firm, dry and free from dust. b) All repairing work/undulation to be completed before painting. c) Mix materials thoroughly as per manufacture’s guideline. d) Polythene must be laid at the bottom of the building below the painting area. e) Apply masking tape over aluminum window frame to avoid any paint marks on windows. f) Polythene should be laid on the floor of the flat, to avoid bubble spray marks inside the flat.