Tiêu đề 7 washing machine.pdf ✅

Test Method Conformity Assurance Dammam – Electrical Lab Product Washing machine Issue date 01/04/2024 Test method # TMD01007 Revision 01 Reference standered SASO GSO IEC 60335-2-7 Revision date 01/04/2024 Result /النتيجة Name of the test/ االختبار اسم البند رقمClause No. Checking Frequency MOCI_D_267A Checking country of origin MOCI_D_267B Checking for Rated Voltage MOCI_D_267B Marking and instructions 7 against access to live parts 8 Power input and current 10 Heating 11 Moisture resistance 15 Leakage current and electric strength 16 MOCI Directive (5696/9/5/267) MOCI_120 V MOCI Directive 267 MOCI D 267A MOCI Directive 267 MOCI D 267B labelling SASO 2885 5.5
Test Method Conformity Assurance Dammam – Electrical Lab Product Washing machine Issue date 01/04/2024 Test method # TMD01007 Revision 01 Reference standered SASO GSO IEC 60335-2-7 Revision date 01/04/2024 SASO 220... Checked of the plug configuration 7 Marking and instructions 7.1 rated voltage or rated voltage range in volts; symbol for nature of supply, unless the rated frequency is marked; rated power input in watts or rated current in amperes; name, trade mark or identification mark of the manufacturer or responsible vendor; model or type reference; symbol IEC 60417-5172 (2003-02) for class II appliances only; IP number according to degree of protection against ingress of water, other than IPX0; symbol IEC 60417-5180 (2003-02), for class III appliances Appliances without automatic water level control shall be marked with the maximum water level.Appliances not intended for connection to the hot water supply and not provided with heating elements shall be marked with the substance of the following: CAUTION: Do not connect to the hot water supply. Appliances having different rated values , the different values separated by an oblique stroke. 7.5 For appliances marked with more than one rated voltage or with one or more rated voltage ranges, the rated power input or rated current for each of these voltages or ranges shall be marked 7.10 The different positions of switches on stationary appliances and the different positions of controls on all appliances shall be indicated by figures, letters or other visual means. This requirement also applies to switches which are part of a control. If the off position is only indicated by letters, the word "off" shall be used. 7.12 Instructions for use shall be provided with the appliance so that the appliance can be used safely The instructions shall specify the maximum mass of dry cloth in kilograms to be used in the appliance. 7.12.1 For washing machines having ventilation openings in the base, the installation instructions shall state that the openings must not be obstructed by a carpet. 7.14 The markings required by the standard shall be clearly legible and durable.
Test Method Conformity Assurance Dammam – Electrical Lab Product Washing machine Issue date 01/04/2024 Test method # TMD01007 Revision 01 Reference standered SASO GSO IEC 60335-2-7 Revision date 01/04/2024 8 Protection against access to live parts 8.1.1 For class 0 appliances, class II appliances and class II constructions, It shall not be possible to touch live parts or live parts protected only by lacquer, enamel, ordinary paper, cotton, oxide film, beads, or sealing compound except self-hardening resins, with the probe B of IEC 61032. 8.1.2 It shall not be possible to touch live parts with the test probe. Test probe 13 of IEC 61032 8.1.3 for appliances other than those of class II, It shall not be possible to touch live parts with the test probe test probe 41 of IEC 61032. 10 Power input and current 10.1 Power input measurement test The selected representative period is the period, such as filling with water, washing, rinsing , water extraction, spinning or braking, during which the power input is the highest. 10.2 Current measurement test The selected representative period is the period, such as filling with water, washing, rinsing , water extraction, spinning or braking, during which the current is the highest. 11 Heating 11.7 Appliances incorporating a programmer are operated for three cycles with the program that results in highest temperature rises, with a rest period of 4 min between cycles. Other appliances are operated for three cycles, with a rest period of 4 min between cycles. Each cycle consists of the following operations: for appliances without means for water extraction and for washing machines witha hand-operated wringer : washing for appliances having a single drum for washing and water extraction : washing followed by water extraction for appliances having separate drums for washing and water extraction that cannot be used simultaneously : washing and water extraction separated by an additional 4 min rest period for appliances having separate drums for washing and water extraction that can be used simultaneously : washing together with water extraction so that the operations terminate simultaneously washing together with water extraction so that the operations terminate simultaneously :
Test Method Conformity Assurance Dammam – Electrical Lab Product Washing machine Issue date 01/04/2024 Test method # TMD01007 Revision 01 Reference standered SASO GSO IEC 60335-2-7 Revision date 01/04/2024 that allow the same quantity of textile material to be washed and dried in the drum : washing followed by water extraction,followed by drying; that according to the instructions,only allow a portion of the washed textile material to be dried in the drum : washing followed by water extraction followed by two drying periods, with an additional rest period of 4 min before each drying period. In this case only two cycles of operation are carried out For appliances incorporating a timer, the washing period, the water extraction period and the drying period are equal to the maximum period allowed by the timer For appliances without a timer, – the washing period has a duration of :  6 min, for washing machines of the continuously rotating impeller type,  18 min, for washing machines of the agitator type,  25 min for washing machines of the drum type, unless a longer period is stated in the instructions; – the water extraction period has a duration of 5 min. The rest period, including any braking time, has a duration of 4 min. After the specified sequence of operation, discharge pumps that are driven by a separate motor and switched on and off manually, are subjected to three operating periods separated by rest periods of 4 min. Each operating period is equal to 1,5 times the period necessary to empty the appliance when filled to the maximum normal water level. The outlet of the water discharge pipe is 900 mm above the floor. 11.8 Appliances and their surroundings shall not attain excessive temperatures in normal use 15 Moisture resistance 15.1 Appliance shall provide the degree of protection against moisture in accordance with the classification of the appliance. Clause 16.3 & 29 according to IP degree Magnetic valves and similar components incorporated in external hoses for connection to the water mains are subjected to the test specified for IPX7 appliances. 15.2 Appliances shall be constructed so that spillage of liquid in normal use does not affect their electrical insulation, even if an inlet valve fails to close. 15.3 Appliances shall be proof against humid conditions which may occur in normal use. Check clause. 16 immediately after humidity treatment. 16 Leakage current and electric strength