Tiêu đề Sony IMX477 Datasheet.pdf ✅

IMX477-AACK-C 2 Device Structure ◆CMOS image sensor ◆Image size : Diagonal 7.857 mm (Type 1/2.3) ◆Total number of pixels : 4072 (H) × 3176 (V) approx. 12.93 M pixels ◆Number of effective pixels : 4072 (H) × 3064 (V) approx. 12.47 M pixels ◆Number of active pixels : 4056 (H) × 3040 (V) approx. 12.33 M pixels ◆Chip size : 7.564 mm (H) × 5.476 mm (V) ◆Unit cell size : 1.55 μm (H) × 1.55 μm (V) ◆Substrate material : Silicon Optical Black Array and Readout Scan Direction (Top View) V This sensor (Top view) A1 Object Lens M1 M10 A10 H Optical Black Array Note) Arrows in the figure indicate scanning direction during default readout in the vertical direction and the horizontal direction. Figure 1 Optical Black Array and Readout Scan Direction
IMX477-AACK-C 3 Absolute Maximum Ratings Item Symbol Ratings Unit notes Supply voltage (analog) VANA -0.3 to +3.3 V refer to VSS level Supply voltage (digital) VDIG -0.3 to +1.8 V Supply voltage (interface) VIF -0.3 to +3.3 V Input voltage (digital) VI -0.3 to +3.3 V Output voltage (digital) VO -0.3 to +3.3 V Guaranteed operating temperature TOPR -20 to +75 ̊C Guaranteed storage temperature TSTG -30 to +80 ̊C Guaranteed performance temperature TSPEC -20 to +60 ̊C Recommended Operating Voltage *1 VANA: VDDSUB, VDDHAN, VDDHCM1 to 2, VDDHSN1 to 4 (2.8 V power supply) *2 VDIG: VDDLSC1 to 4, VDDLCN1 to 2, VDDLPL1 to 2, VDDLIF (1.05 V power supply) *3 VIF: VDDMIO1 to 2, VDDMIF (1.8 V power supply) Item Symbol Ratings Unit notes Supply voltage (analog) VANA *1 2.8 ± 0.1 V refer to VSS level Supply voltage (digital) VDIG *2 1.05 ± 0.1 V Supply voltage (interface) VIF *3 1.8 ± 0.1 V
IMX477-AACK-C 4 USE RESTRICTION NOTICE This USE RESTRICTION NOTICE ("Notice") is for customers who are considering or currently using the image sensor products ("Products") set forth in this specifications book. Sony Semiconductor Solutions Corporation ("SSS") may, at any time, modify this Notice which will be available to you in the latest specifications book for the Products. You should abide by the latest version of this Notice. If a SSS subsidiary or distributor has its own use restriction notice on the Products, such a use restriction notice will additionally apply between you and the subsidiary or distributor. You should consult a sales representative of the subsidiary or distributor of SSS on such a use restriction notice when you consider using the Products. Use Restrictions  The Products are intended for incorporation into such general electronic equipment as office products, communication products, measurement products, and home electronics products in accordance with the terms and conditions set forth in this specifications book and otherwise notified by SSS from time to time.  You should not use the Products for critical applications which may pose a life- or injury-threatening risk or are highly likely to cause significant property damage in the event of failure of the Products. You should consult your sales representative beforehand when you consider using the Products for such critical applications. In addition, you should not use the Products in weapon or military equipment.  SSS disclaims and does not assume any liability and damages arising out of misuse, improper use, modification, use of the Products for the above-mentioned critical applications, weapon and military equipment, or any deviation from the requirements set forth in this specifications book. Design for Safety  SSS is making continuous efforts to further improve the quality and reliability of the Products; however, failure of a certain percentage of the Products is inevitable. Therefore, you should take sufficient care to ensure the safe design of your products such as component redundancy, anti-conflagration features, and features to prevent mis-operation in order to avoid accidents resulting in injury or death, fire or other social damage as a result of such failure. Export Control  If the Products are controlled items under the export control laws or regulations of various countries, approval may be required for the export of the Products under the said laws or regulations. You should be responsible for compliance with the said laws or regulations. No License Implied  The technical information shown in this specifications book is for your reference purposes only. The availability of this specifications book shall not be construed as giving any indication that SSS and its licensors will license any intellectual property rights in such information by any implication or otherwise. SSS will not assume responsibility for any problems in connection with your use of such information or for any infringement of third-party rights due to the same. It is therefore your sole legal and financial responsibility to resolve any such problems and infringement. Governing Law  This Notice shall be governed by and construed in accordance with the laws of Japan, without reference to principles of conflict of laws or choice of laws. All controversies and disputes arising out of or relating to this Notice shall be submitted to the exclusive jurisdiction of the Tokyo District Court in Japan as the court of first instance. Other Applicable Terms and Conditions  The terms and conditions in the SSS additional specifications, which will be made available to you when you order the Products, shall also be applicable to your use of the Products as well as to this specifications book. You should review those terms and conditions when you consider purchasing and/or using the Products. General-0.0.9