Tiêu đề Sony IMX477 Datasheet.pdf ✅

1 Diagonal 7.857 mm (Type 1/2.3) 12.3Mega-Pixel CMOS Image Sensor with Square Pixel for Color Cameras IMX477-AACK-C Description IMX477-AACK-C is a diagonal 7.857 mm (Type 1/2.3) 12.3 Mega-pixel CMOS active pixel type stacked image sensor with a square pixel array. It adopts Exmor RSTM technology to achieve high speed image capturing by column parallel A/D converter circuits and high sensitivity and low noise image (comparing with conventional CMOS image sensor) through the backside illuminated imaging pixel structure. R, G, and B pigment primary color mosaic filter is employed. It equips an electronic shutter with variable integration time. It operates with three power supply voltages: analog 2.8 V, digital 1.05 V and 1.8 V for input/output interface and achieves low power consumption. In addition, this product is designed for use in consumer use camcorder. When using this for another application, Sony Semiconductor Solutions Corporation does not guarantee the quality and reliability of product. Therefore, don't use this for applications other than consumer use camcorder. In addition, individual specification change cannot be supported because this is a standard product. Consult your Sony Semiconductor Solutions Corporation sales representative if you have any questions. Features ◆Back-illuminated and stacked CMOS image sensor Exmor RS ◆Digital Overlap High Dynamic Range (DOL-HDR) mode with raw data output. ◆High signal to noise ratio (SNR). ◆Full resolution @60 frame/s (Normal), 4K2K @60 frame/s (Normal), 1080p @240 frame/s Full resolution @40 frame/s (12 bit Normal), Full resolution @30 frame/s (DOL-HDR, 2 frame) ◆Output video format of RAW12/10/8, COMP8. ◆Power Save Mode ◆Pixel binning readout and V sub-sampling function. ◆Independent flipping and mirroring. ◆Input clock frequency 6 to 27 MHz ◆CSI-2 serial data output (MIPI 2lane/4lane, Max. 2.1 Gbps/lane, D-PHY spec. ver. 1.2 compliant) ◆2-wire serial communication. ◆Two PLLs for independent clock generation for pixel control and data output interface. ◆Ambient Light Sensor (ALS) ◆Fast mode transition. (on the fly) ◆Dual sensor synchronization operation (Multi camera compatible) ◆7 K bit of OTP ROM for users. ◆Built-in temperature sensor ◆10-bit/12-bit A/D conversion on chip ◆92-pin high-precision ceramic package Sony Semiconductor Solutions Corporation reserves the right to change products and specifications without prior notice. This information does not convey any license by any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the operation of the devices. Sony Semiconductor Solutions Corporation cannot assume responsibility for any problems arising out of the use of these circuits. E17203
IMX477-AACK-C 2 Device Structure ◆CMOS image sensor ◆Image size : Diagonal 7.857 mm (Type 1/2.3) ◆Total number of pixels : 4072 (H) × 3176 (V) approx. 12.93 M pixels ◆Number of effective pixels : 4072 (H) × 3064 (V) approx. 12.47 M pixels ◆Number of active pixels : 4056 (H) × 3040 (V) approx. 12.33 M pixels ◆Chip size : 7.564 mm (H) × 5.476 mm (V) ◆Unit cell size : 1.55 μm (H) × 1.55 μm (V) ◆Substrate material : Silicon Optical Black Array and Readout Scan Direction (Top View) V This sensor (Top view) A1 Object Lens M1 M10 A10 H Optical Black Array Note) Arrows in the figure indicate scanning direction during default readout in the vertical direction and the horizontal direction. Figure 1 Optical Black Array and Readout Scan Direction
IMX477-AACK-C 3 Absolute Maximum Ratings Item Symbol Ratings Unit notes Supply voltage (analog) VANA -0.3 to +3.3 V refer to VSS level Supply voltage (digital) VDIG -0.3 to +1.8 V Supply voltage (interface) VIF -0.3 to +3.3 V Input voltage (digital) VI -0.3 to +3.3 V Output voltage (digital) VO -0.3 to +3.3 V Guaranteed operating temperature TOPR -20 to +75 ̊C Guaranteed storage temperature TSTG -30 to +80 ̊C Guaranteed performance temperature TSPEC -20 to +60 ̊C Recommended Operating Voltage *1 VANA: VDDSUB, VDDHAN, VDDHCM1 to 2, VDDHSN1 to 4 (2.8 V power supply) *2 VDIG: VDDLSC1 to 4, VDDLCN1 to 2, VDDLPL1 to 2, VDDLIF (1.05 V power supply) *3 VIF: VDDMIO1 to 2, VDDMIF (1.8 V power supply) Item Symbol Ratings Unit notes Supply voltage (analog) VANA *1 2.8 ± 0.1 V refer to VSS level Supply voltage (digital) VDIG *2 1.05 ± 0.1 V Supply voltage (interface) VIF *3 1.8 ± 0.1 V