Tiêu đề Olympus BX53 Microscope User Manual.pdf ✅

INSTRUCTIONS BX53 SYSTEM MICROSCOPE This instruction manual is for the Olympus System Microscope Model BX53. To ensure the safety, obtain optimum performance and to familiarize yourself fully with the use of this microscope, we recommend that you study this manual thoroughly before operating the microscope. Retain this instruction manual in an easily accessible place near the work desk for future reference. A X 7 8 5 5
In accordance with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment, this symbol indicates that the product must not be disposed of as unsorted municipal waste, but should be collected separately. Refer to your local Olympus distributor in EU for return and/or collection systems available in your country. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
BX53 CONTENTS Correct assembly and adjustments are critical for the microscope to exhibit its full performance. If you are going to assemble the microscope yourself, please read section 10, “ASSEMBLY" (pages 34 to 37) carefully. IMPORTANT -- Be sure to read this section for safe use of the equipment. -- 1-3 13-26 4 5-7 8,9 10-12 1 MODULE NOMENCLATURE 2 CONTROLS 3 FLOW OF OBSERVATION 4 SIMPLIFIED OBSERVATION PROCEDURE 4-1 Basic Operation (Until Observation of Specimen)........................................................................10,11 4-2 Microscope Adjustments (How to Improve the Observed Image) ........................11,12 1 Adjusting the Interpupillary Distance .................................................................................11 2 Adjusting the Diopter ........................................11 3 Adjusting the Centering ..................................12 4 Adjusting the Contrast ......................................12 5 USING THE CONTROLS 5-1 Base...............................................................................................................................................................................................................13-16 1 Adjusting the Brightness ...............................13 2 Using the Light Intensity Preset Switch........................................................................................13 3 Using the ECO/NORMAL Switch .......14 4 Using the Filters...............................................14-16 5-2 Focusing Block .................................................................................................................................................................................17,18 1 Focusing Controls ...................................................17 2 Adjusting the Focus ..............................................17 3 Replacing the Fine Adjustment Knob ...........................................................................................18 4 Adjusting the Coarse Adjustment Knob Tension.................................................................18 5 Pre-focusing Lever .................................................18 5-3 Stage.............................................................................................................................................................................................................19-21 1 Placing the Specimen .......................................19 2 Using the Auxiliary Slide Holder..........19 3 Adjusting the X- and Y-Axis Knob Tension ................................................................................. 20 4 Rotating the Stage ..................................... 21 5 Adjusting the Stage Height ..................... 21 5-4 Observation Tube ................................................................................................................................................................... 22-24 1 Adjusting the Diopter ....................................... 22 2 Using the Eye Shades.................................... 22 3 Using the Eyepiece Micrometer Disk ............................................................................................ 23 4 Selecting the Light Path of the Trinocular Tube ......................................................... 23 5 Adjusting the Tilt ..................................................... 24 6 Using Eyepieces Incorporating a Micrometer ...................................................................... 25 5-5 Condenser................................................................................................................................................................................................... 25 1 Compatibility of Objectives and Condensers ................................................................... 25
5-6 Immersion Objectives ................................................................................................................................................................. 26 1 Using Immersion Objectives................. 26 5-7 Objectives with Correction Collar.............................................................................................................................. 26 6 CAMERA RECORDING 7 TROUBLESHOOTING GUIDE 8 SPECIFICATIONS 9 OPTICAL CHARACTERISTICS (UIS2 Series) 10 ASSEMBLY -- See this section for the replacement of the light bulb. -- 11 LAMP HOUSING INSPECTION SHEET 27 28-30 31,32 33 34-37 38 n PROPER SELECTION OF THE POWER SUPPLY CORD.......................................................... 39,40