Tiêu đề 13. WP-12 for Aluminium Form work.pdf ✅

RAYMOND REALTY RR/ WP-12/ Rev - 0 Page 1 of 16 WORK PROCEDURE-12 FOR ALUMINIUM FORMWORK
RAYMOND REALTY RR/ WP-12/ Rev - 0 Page 2 of 16 WORK PROCEDURE FOR ALUMINIUM FORM WORKS 1. Objective:- This procedure is prepared to ensure proper erection, fixing & removal of aluminum formwork. 2. Scope:- The procedure shall be adopted for all the works of Raymond Realty. in building works projects. 3. References:- 1. Relevant drawings. 2. Technical Specification. 3. Relevant Standards. 4. Responsibility:- The section in charge/Supervisor: Concern section in charge and Supervisor shall execute our work as per procedure and maintain the checklist for days of work. QA/QC Engineer: Ensure the proper methodology is being followed during execution. 5. Safety Precautions:- 1. Only trained persons should handle the activities. 2. Ensure that material handling shall be done properly. 3. Use of PPE like goggles, hand gloves, helmets, and gumboots. 4. Use of arm guard in cutting machine. 5. Mitigation hazards while working at heights. 6. Safety precautions while handling & transporting formworks. 6. Machinery, Equipment’s and tools used:- Drilling machine, Measuring Tape 5m,30m, Hammer, Right angle, Plumb bob, spirit level Cotton Line Dori,

RAYMOND REALTY RR/ WP-12/ Rev - 0 Page 4 of 16 1) Beam component: a) beam side panel b) beam soffit panel c) prop head for soffit beam d) beam side bulkhead. 2) Slab component: a) deck panel 3) Wall component: a) wall panel b) rocker c) kicker 4) Other components: a) internal soffit corner b) external soffit corner c) stub pins WALL COMPONENTS: 1. Wall Panel: - It forms the face of the wall. It is an Aluminum sheet properly cut to fit the exact size of the wall. Fig.: Wall Panel 2. Rocker: - It is a supporting component of the wall. It is an L-shaped panel having allotment holes for stub pins. Fig.: Rocker 3. Kicker: - It forms the wall face at the top of the panels and acts as a ledge to support