Title 23 appliances for skin or hair care.pdf ✅

Test Method Conformity Assurance Dammam – Electrical Lab Product appliances for skin or hair care Issue date 01/04/2024 Test method # TMD01023 Revision 01 Reference standered SASO GSO IEC 60335-2-23 Revision date 01/04/2024 Result /النتيجة Name of the test/ االختبار اسم البند رقمClause No. Checking Frequency MOCI_D_267A Checking country of origin MOCI_D_267B Checking for Rated Voltage MOCI_D_267B 7 instructions and Marking الوسم و االرشادات live to access against Protectionالحماية من الوصول الى االجزاء المكهربة parts 8 التيار و القدرةPower input and current 10 11 Heating – rise Temperatureاالرتفاع في الحرارة and current Leakageتيار التسريب و المتانة الكهربائية electric strength 13 19 operation Abnormal التشغيل غير الطبيعي 21 المتانة الميكانيكية strength Mechanical (2203SASO(4.3 Plug المقننات القابس : الشكل و المقاسات و
Test Method Conformity Assurance Dammam – Electrical Lab Product appliances for skin or hair care Issue date 01/04/2024 Test method # TMD01023 Revision 01 Reference standered SASO GSO IEC 60335-2-23 Revision date 01/04/2024 7 Markings and Instructions 7.1 Appliances shall be marked with the: – rated voltage or rated voltage range in volts – symbol for nature of supply, unless the rated frequency is marked; – rated power input in watts or rated current in amperes; – name, trade mark or identification mark of the manufacturer or responsible vendor – model or type reference symbol 5172 of IEC 60417, for class II appliances only IP number according to degree of protection against ingress of water, other than IPX0 Addition: Portable hairdryers, curling irons and similar appliances shall be marked with symbol 5582 of IEC 60417-1 combined with the prohibition sign of ISO 3864, except for the specified colours, or with the substance of the following: WARNING: Do not use this appliance near water. 7.2 Stationary appliances for multiple supply shall be marked with the substance of the following: Warning: Before obtaining access to terminals, all supply circuits must be disconnected This warning shall be placed in the vicinity of the terminal cover 7.3 Appliances having a range of rated values and which can be operated without adjustment throughout the range shall be marked with the lower and upper limits of the range separated by a hyphen.
Test Method Conformity Assurance Dammam – Electrical Lab Product appliances for skin or hair care Issue date 01/04/2024 Test method # TMD01023 Revision 01 Reference standered SASO GSO IEC 60335-2-23 Revision date 01/04/2024 Appliances having different rated values and which have to be adjusted for use at a particular value by the user or installer shall be marked with the different values separated by an oblique stroke. 7.4 If the appliance can be adjusted for different rated voltages, the voltage to which the appliance is adjusted shall be clearly discernible. 7.5 For appliances marked with more than one rated voltage or with one or more rated voltage ranges, the rated power input or rated current for each of these voltages or ranges shall be marked. The upper and lower limits of the rated power input or rated current shall be marked on the appliance so that the relation between input and voltage is clear. 7.6 Correct use of symbols Addition: [symbol 5582 of IEC 60417- 1] Suitable for use in a bath or shower 7.7 Appliances to be connected to more than two supply conductors and appliances for multiple supply shall have a connection diagram fixed to them, unless the correct mode of connection is obvious. 7.8 Except for type Z attachment, terminals used for connection to the supply mains shall be indicated as follows: – Terminals intended exclusively for the neutral conductor shall be indicated by the letter N; – Protective earthing terminals shall be indicated by symbol 5019 of IEC 60417. These indications shall not be placed on screws, removable washers or other parts which can be removed when conductors are being connected.
Test Method Conformity Assurance Dammam – Electrical Lab Product appliances for skin or hair care Issue date 01/04/2024 Test method # TMD01023 Revision 01 Reference standered SASO GSO IEC 60335-2-23 Revision date 01/04/2024 7.9 Unless it is obviously unnecessary, switches which may give rise to a hazard when operated shall be marked or placed so as to indicate clearly which part of the appliance they control 7.10 The different positions of switches on stationary appliances and the different positions of controls on all appliances shall be indicated by figures, letters or other visual means. If figures are used for indicating the different positions, the off position shall be indicated by the figure 0 and the position for a higher value, such as output, input, speed or cooling effect, shall be indicated by a higher figure. The figure 0 shall not be used for any other indication unless it is positioned and associated with other numbers so that it does not give rise to confusion with the indication of the off position. 7.11 Controls intended to be adjusted during installation or in normal use shall be provided with an indication for the direction of adjustment. 7.12 Instructions for use shall be provided with the appliance so that the appliance can be used safely If it is necessary to take precautions during user maintenance, appropriate details shall be given. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. Addition: The instructions for portable hairdryers shall include the substance of the following: