Title Generator Set Data Sheet C1675D5A (16.10.2017).pdf ✅

power.cummins.com ©2017 Cummins Inc. | DS47-CPGK (10/17) Generator set data sheet Model: C1675 D5A Frequency: 50 Hz Fuel type: Diesel Spec sheet: SS16-CPGK Noise data sheet (open/enclosed): ND50-OSHHP/ND50-CSHHP Airflow data sheet: AF50-HHP Derate data sheet (open/enclosed): DD50-OSHHP/DD50-CSHHP Transient data sheet: RTF Fuel consumption Standby Prime kVA (kW) kVA (kW) Ratings 1675 (1340) 1500 (1200) Load 1/4 1/2 3/4 Full 1/4 1/2 3/4 Full US gph 24.3 43.7 66.8 91.2 23.3 44.1 62.8 81.6 L/hr 92 165 253 345 88 167 238 309 Engine Standby rating Prime rating Engine manufacturer Cummins Engine model KTA50 GS8 Configuration Cast iron, 60 o V16 cylinder Aspiration Turbocharged and low temperature after-cooled Gross engine power output, kWm 1429 1287 BMEP at set rated load, kPa 2275 2062 Bore, mm 159 Stroke, mm 159 Rated speed, rpm 1500 Piston speed, m/s 7.9 Compression ratio 14.9:1 Lube oil capacity, L 178 Overspeed limit, rpm 1725 ±50 Regenerative power, kW 116 Governor type Electronic Starting voltage 24 Volts DC Fuel flow Maximum fuel flow, L/hr 570 Maximum fuel inlet restriction, mm Hg 203 Maximum fuel inlet temperature, °C 70
power.cummins.com ©2017 Cummins Inc. | DS47-CPGK (10/17) Air Standby rating Prime rating Combustion air, m3 /min 99.3 94.9 Maximum air cleaner restriction, kPa 6.2 Exhaust Exhaust gas flow at set rated load, m3 /min 261 242 Exhaust gas temperature, °C 510 499 Maximum exhaust back pressure, kPa 6.7 Standard set-mounted radiator cooling Ambient design, °C 40 Fan load, kWm 30.0 Coolant capacity (with radiator), L 496 Cooling system air flow, m3 /sec @ 12.7 mm H2O 21.7 Total heat rejection, Btu/min 52430 44750 Maximum cooling air flow static restriction mm H2O 12.7 Weights* Open Enclosed Unit dry weight kgs 10348 18199 Unit wet weight kgs 10967 18818 * Weights represent a set with standard features. See outline drawing for weights of other configurations. Dimensions Length Width Height Standard open set dimensions mm 5811 2033 2330 Enclosed set standard dimensions (with exhaust stack) mm 12192 2438 2896 (3233) Genset outline Open set Enclosed set Outlines are for illustrative purposes only. Please refer to the genset outline drawing for an exact representation of this model.
For more information contact your local Cummins distributor or visit power.cummins.com ©2017 Cummins Inc. All rights reserved. Cummins is a registered trademark of Cummins Inc. PowerCommand, AmpSentry, InPower and “Our energy working for you.” are trademarks of Cummins Inc. Other company, product, or service names may be trademarks or service marks of others. Specifications are subject to change without notice. DS47-CPGK (10/17) Alternator data Connection Temp rise oC Duty Alternator Voltage Wye, 3-phase 150/125 S/P PI734D 380 – 440 V Wye, 3-phase 125/105 S/P MVSI804R 3300 V Wye, 3-phase 125/105 S/P HVSI804R 6300 – 6600 V Wye, 3-phase 125/105 S/P HVSI804R 10000 V Wye, 3-phase 125/105 S/P HVSI804R 10500 –11000 V Ratings definitions Emergency Standby Power (ESP): Limited-Time Running Power (LTP): Prime Power (PRP): Base Load (Continuous) Power (COP): Applicable for supplying power to varying electrical load for the duration of power interruption of a reliable utility source. Emergency Standby Power (ESP) is in accordance with ISO 8528. Fuel stop power in accordance with ISO 3046, AS 2789, DIN 6271 and BS 5514. Applicable for supplying power to a constant electrical load for limited hours. Limited-Time Running Power (LTP) is in accordance with ISO 8528. Applicable for supplying power to varying electrical load for unlimited hours. Prime Power (PRP) is in accordance with ISO 8528. Ten percent overload capability is available in accordance with ISO 3046, AS 2789, DIN 6271 and BS 5514. Applicable for supplying power continuously to a constant electrical load for unlimited hours. Continuous Power (COP) is in accordance with ISO 8528, ISO 3046, AS 2789, DIN 6271 and BS 5514. Formulas for calculating full load currents: Three phase output Single phase output kW x 1000 kW x SinglePhaseFactor x 1000 Voltage x 1.73 x 0.8 Voltage