Title Big Ass Fans Control Options.pdf ✅

STANDARD AND MULTI-FAN CONTROL OPTIONS Standard Control Max Fans per Control Multi-Fan Control Option Max Fans per Control LARGE OVERHEAD FANS Powerfoil X4 Powerfoil D Standard Controller 1 BAFCon 8 • Run CAT5 cable from controller to first fan, then from first fan to second fan, second fan to third fan, etc. • It is recommended that the CAT5 cable is installed in conduit that is not shared with line voltage. • If using BAFCon’s SmartSense feature, one controller should be installed in each fan “zone” to enable automatic speed adjustment in response to local/zone temperature and humidity readings. • Each BAFCon controller can connect to a BACnet MSTP system to provide individual control of all products connected to the controller. BACnet Adapter 32 • The BACnet adapter connects fans to a BACnet automation system. One adapter enables individual control of up to 32 fans. • Compatible with BACnet MSTP and BACnet over IP Dewtect 32 • Dewtect is a condensation abatement system designed specifically to help prevent condensation on surfaces. Powerfoil 8 Basic 6 Standard Controller 1 BAFCon 8 • Run CAT5 cable from controller to first fan, then from first fan to second fan, second fan to third fan, etc. • It is recommended that the CAT5 cable is installed in conduit that is not shared with line voltage. • Optionally, the controller can be connected to the fans using Modbus cable. • If using BAFCon’s SmartSense feature, one controller should be installed in each fan “zone” to enable automatic speed adjustment in response to local/zone temperature and humidity readings. • Each BAFCon controller can connect to a BACnet MSTP system to provide individual control of all products connected to the controller. • 120 V power must be provided at the controller location to power BAFCon. BACnet Adapter 32 • The BACnet adapter is used to connect fans to a BACnet automation system. One adapter enables individual control of up to 32 fans. • Compatible with BACnet MSTP and BACnet over IP • The optional remote operator station is a fan control box with a speed potentiometer and a Manual/Auto switch that is connected to an individual fan in the system. • The remote operator station enables a local operator to override the master system to locally control ONLY the connected fan. • One remote operator station is required for each fan in the system for which local control is desired. • Remote operator stations are NOT required for fans in the system that do not need to be controlled locally. Dewtect 32 • Dewtect is a condensation abatement system designed specifically to help prevent condensation on surfaces. • The optional remote operator station is a fan control box with a speed potentiometer and a Manual/Auto switch that is connected to an individual fan in the system. • The remote operator station enables a local operator to override the master system to locally control ONLY the connected fan. • One remote operator station is required for each fan in the system for which local control is desired. • Remote operator stations are NOT required for fans in the system that do not need to be controlled locally. Essence Wired Wall Controller 1 to 10 BAFCon 8 • All fans will be controlled as a group. No individual control of each fan. • 120 V power must be provided at the controller location to power BAFCon. • Daisy chain fans using 18–16 AWG solid or stranded wire. BACnet Adapter with 0–10 V Module 32 • The BACnet adapter is used to connect fans to a BACnet automation system. One adapter enables individual control of up to 32 fans. • Compatible with BACnet MSTP and BACnet over IP • Up to 32 0–10 V modules can be connected to each BACnet adapter. • Use 16 AWG stranded wire. It is recommended that the wiring is installed in conduit that is not shared with line voltage. Wireless Wall Controller (Optional) Dewtect with 0–10 V Module 32 • Dewtect is a condensation abatement system designed specifically to help prevent condensation on surfaces. • Up to 32 0–10 V modules can be connected to each Dewtect controller. • Use 16 AWG stranded wire. It is recommended that the wiring is installed in conduit that is not shared with line voltage. SMALL OVERHEAD FANS i6es6 Handheld Remote 1 es6: 0–10 V Module i6: 0–10 V Wiring (selected at time of order) 10 • Fans compatible with 0–10 V fans must be selected at time of order. • Enables BMS control of the fan speed and light intensity via 0–10 V integration. • Allows integration into most home and building automation systems. • Input signal is job dependent and could be a 0–10 V wall dimmer or automation controller supplying a 0–10 V signal. • Fans wired for 0–10 V control require two separate 0–10 V channels for light and fan control. For full functionality, two wall controllers are required, or one automation controller with multiple • 0–10 V channels is required. • Make sure each controller has a maximum current capacity of 2 mA or higher. • Daisy chain fans using 20–14 AWG solid or stranded wire. • When the fan is wired for 0–10 V control, all other fan controls, including the remote control and mobile app, are disabled. BAF Mobile App Individual Fan Control: As Voice Control many as Wi-Fi supports (Amazon Alexa or Google Assistant) Haiku Handheld Remote 1 0–10 V Module (Universal mount only) 10 • One 0–10 V module kit must be purchased and installed with each fan in the system. • The 0–10 V module is compatible with Universal Mount fans. • Enables BMS control of the fan speed and light intensity via 0–10 V integration. • Allows integration into most home and building automation systems. • Input signal is job dependent and could be a 0–10 V wall dimmer or automation controller supplying a 0–10 V signal. • Fans wired for 0–10 V control require two separate 0–10 V channels for light and fan control. For full functionality, two wall controllers are required, or one automation controller with multiple 0–10 V channels is required. • Make sure each controller has a maximum current capacity of 2 mA or higher. • Daisy chain fans using 20–14 AWG solid or stranded wire. • When the fan is wired for 0–10 V control, all other fan controls, including the remote control and mobile app, are disabled. • BAFCon can be utilized in conjunction with the 0–10 V module for up to 8 fans. Haiku Mobile App Individual Fan Control: As many as Wi-Fi supports Multi-fan control: 8 (grouped in mobile app) Voice Control (Amazon Alexa or Google Assistant) Haiku L* Handheld Remote 1 Haiku L 0–10 V Module 10 • One 0–10 V module kit must be purchased and installed with each fan in the system. • Enables BMS control of the fan speed and light intensity via 0–10 V integration. • Allows integration into most home and building automation systems. • Input signal is job dependent and could be a 0–10 V wall dimmer or automation controller supplying a 0–10 V signal. • Fans wired for 0–10 V control require two separate 0–10 V channels for light and fan control. For full functionality, two wall controllers are required, or one automation controller with multiple 0–10 V channels is required. • Make sure each controller has a maximum current capacity of 2 mA or higher. • Daisy chain fans using 20–14 AWG solid or stranded wire. • When the fan is wired for 0–10 V control, all other fan controls, including the remote control and mobile app, are disabled. Haiku L Wired Wall Control 1 Haiku Mobile App (Wi-Fi module required) Individual Fan Control: As many as Wi-Fi supports Multi-fan control: 8 (grouped in mobile app) Voice Control (Amazon Alexa or Google Assistant; Wi-Fi module required) DIRECTIONAL FANS AirEye Infinitely Variable Speed Control Occupancy Sensor (Optional) 1 BAFCon 8 • All fans are controlled as a group. No individual control of each fan. • 120 V power must be provided at the controller location to power BAFCon. • Daisy chain fans using 18–16 AWG solid or stranded wire. Automation and Multi-Fan Kit 8 • All fans are controlled as a group. No individual control of each fan. • Controller must be able to source 0–3 VDC and 0.25 mA per fan. • Daisy chain fans using 18–16 AWG solid or stranded wire. Pivot Wired Wall Controller 1 to 10 BAFCon 8 • All fans are controlled as a group. No individual control of each fan. • 120 V power must be provided at the controller location to power BAFCon. • Daisy chain fans using 18–16 AWG solid or stranded wire. BACnet Adapter with 0–10 V Module 32 • The BACnet adapter is used to connect fans to a BACnet automation system. One adapter enables individual control of up to 32 fans. • Compatible with BACnet MSTP and BACnet over IP • Up to 32 0–10 V modules can be connected to each BACnet adapter. • Use 16 AWG stranded wire. It is recommended that the wiring is installed in conduit that is not shared with line voltage. Dewtect with 0–10 V Module 32 • Dewtect is a condensation abatement system designed specifically to help prevent condensation on surfaces. • Up to 32 0–10 V modules can be connected to each Dewtect controller. • Use 16 AWG stranded wire. It is recommended that the wiring is installed in conduit that is not shared with line voltage. Yellow Jacket Standard Speed Controller 1 BAFCon 8 - All fans are controlled as a group. No individual control of each fan. - 120 V power must be provided at the controller location to power BAFCon. - Daisy chain fans using 18–16 AWG solid or stranded wire. Sidekick Infinitely Variable Speed Control 1 N/A N/A BAFCON SUPPORT DETAILS 0–10 V* Modbus Fans Supported AirEye, Essence, Pivot, Yellow Jacket, Haiku, es6** Powerfoil X4, Powerfoil D, Powerfoil 8, Basic 6 Diagnostics No Yes Fault Reporting No Yes Auto — SmartSense Yes Yes Independent Fan Control No. All 0–10 V fans run at same speed Yes Scheduling (When Available) Yes Yes Speed Control 0–100% 0–100% BACnet Yes Yes BAF-MISC-134-ENG-01 REV. F 05/31/2023 * Seven (7) fans can also be connected via Modbus when 0–10 V output is used. ** Only one type of 0–10 V fan can be controlled from each BAFCon controller. For example, an AirEye fan and an Essence fan cannot be controlled using the same BAFCon controller. * Controls listed here apply only to standard Haiku L offering.